How to reduce the cost of using filter press？

 Cost saving and environmental protection are constant topics in all walks of life, so how to reduce the cost of using a filter press? First of all, you need to know what consumes the cost during the use of the filter press. For most customers who use filter presses, in addition to paying attention to the working efficiency of the filter press, most of them are also concerned about its use cost. If the filter press equipment is used properly or maintained well, the cost saved from a long-term perspective is considerable, and a little bit adds up to a lot.

Filter cloth

As the most frequently replaced component in the filter press, the filter cloth needs to be replaced every three months on average.
After each operation of the equipment is completed, the filter cloth should be cleaned daily to prevent mud residue from sticking to the filter cloth, which will become dry mud blocks after a long time and affect its use.
According to the nature of the sewage to be treated, choosing the appropriate filter cloth and performing regular maintenance can reduce losses to a greater extent.

Filter plate

Filter plates are also consumables during the use of filter presses, and their price is several times higher than that of filter cloths, so the maintenance of filter plates can save costs.
The main failure of filter plates is damage. The filter plates produced by Yongsheng Environment have undergone strict screening, and only those that meet the standards will be delivered to customers, so there is a certain guarantee in quality.

If the filter plate explodes during use, it is likely that there is a deviation in the installation and debugging process and daily maintenance. Before our equipment leaves the factory, the master will adjust the equipment pressure to a suitable state. If the worker operating the equipment is inexperienced, the pressure may be increased by mistake, causing the plate to explode; if the filter cloth is not cleaned and leveled during daily maintenance, it may also cause damage to the filter plate.

Hydraulic oil

Under normal circumstances, hydraulic oil needs to be replaced once a year to ensure that the equipment is in good operating condition.

Ensuring the level and quality of the oil is also to ensure the daily hydraulic power of the equipment, and reducing the failure rate of the equipment can reduce the cost of use.

Human operation

The above mentioned are all about the filter press itself, but all key operations are inseparable from one point, that is, people.
The operation of the filter press must be carried out by workers with relevant operating experience on site, and regular inspections and daily maintenance must be carried out to ensure that the equipment is in good operating condition and save use costs.

The above are the main methods. Do you understand? Try it now! If you need to buy filter press or need to repair and maintain a filter press, you can contact hzfilter press manufacturer. We provide one-stop customized services and solutions. Welcome to consult!