Debugging steps for fully automatic dosing device
As the name suggests, the dosing device is a mechanical automated dosing system , which is widely used in water treatment , petroleum, chemical and other industries. The operation process of the dosing device is very simple. It can be operated manually or through a controller, but when adding Corresponding debugging work must be done before the medicine device starts working. This is necessary to avoid unnecessary trouble! 1.Check whether the water source and power supply are connected. 2.Set the control button of the electric control box to the "manual" position, and check one by one whether each device is intact and whether the motor rotation is correct (the valve on the water inlet pipe should be opened when checking the rotation of the feed motor). 3.Use your hands to move the float ball up and down one by one to see if it can send out a signal normally, and then check whether the level alarm in the hopper can work normally. 4.Put dry...